先进材料与工艺在机载导弹上的研究与应用

先进材料和工艺在机载导弹中的应用是实现机载导弹优异性能的基础和前提.主要讨论了用于机载导弹的复合材料、高温钛合金、铝锂合金、金属间化合物等先进材料和近无余量成形、超精密加工等先进工艺的特点以及国内外的发展概况.     

冷坩埚定向凝固TiAl基合金高温持久性能研究

采用电磁冷坩埚定向凝固技术制备了成分为Ti-47A1-2Cr-2Nb的合金铸锭,定向凝固后的显微组织为α2+γ全片层结构.在0.4～1.2mm/min的抽拉速率范围内,随着抽拉速率的增加,片层间距减小,柱状晶与生长方向的夹角增大.随着温度升高,合金的拉伸强度有所下降,但由于细化片层界面对切变应力变形的阻碍作用,合金的高温拉伸强度会随着抽拉速率的增加而提高.通过对抽拉速率为1.0mm/min试样的拉伸强度与温度的拟合,得到了拉伸强度和温度之间的函数关系.随着抽拉速率的增加,Ti-47A1-2Cr-2Nb合金的持久寿命明显升高,对于抽拉速率为1.2mm/min试样的持久性能测试表明,其持久寿命最长,达到了48h.持久试样的断口形貌表明,其断裂的主要方式是伴随着少量延性断裂的脆性解理断裂.最后根据时间-温度模型,分别采用Larson-Miller和Manson-Haferd参数法建立了定向凝固Ti-47Al-2Cr-2Nb合金的持久强度预测函数模型,预测的理论值与试验结果吻合度较高.     

凝胶点官能度是重均官能度,还是数均官能度

Flory和Stockmayer等的凝胶化理论用重均官能度表示凝胶点或凝胶生成的临界条件,虽已有50多年的历史,并为各国学者所公认,但从分析凝胶点定义的物理意义出发,只要用简单的数学分析,即可证明用重均官能度而不用数均官能度表示凝胶点,与反应程度定义的物理意义和Flory的两个基本假设不符。凝胶化理论新概念用数均官能度表示凝胶点,则不存在不符的问题。     

High resolution science with high redshift galaxies

We summarize the high-resolution science that has been done on high redshift galaxies with Adaptive Optics (AO) on the world’s largest ground-based facilities and with the Hubble Space Telescope (HST). These facilities complement each other. Ground-based AO provides better light gathering power and in principle better resolution than HST, giving it the edge in high spatial resolution imaging and high resolution spectroscopy. HST produces higher quality, more stable PSF’s over larger field-of-views in a much darker sky-background than ground-based AO, and yields deeper wide-field images and low-resolution spectra than the ground. Faint galaxies have steadily decreasing sizes at fainter fluxes and higher redshifts, reflecting the hierarchical formation of galaxies over cosmic time. HST has imaged this process in great structural detail to z  6, and ground-based AO and spectroscopy has provided measurements of their masses and other physical properties with cosmic time. Last, we review how the 6.5 m James Webb Space Telescope (JWST) will measure First Light, reionization, and galaxy assembly in the near–mid-IR after 2013.     

航天测控与数传接收综合信道构想

提出 S/ X航天测控与数传接收综合信道的概念 ,对综合信道进行了设计 ,重点说明综合信道中伪码测距的实现方法。讨论设计测控系统和应用系统综合信道的三种方案 ,并进行了比较分析。     

The development of a Russian communication satellite of small class, operating in the geostationary and high-elliptical orbits

In 1994-1995 Lavochkin Association (Russia) together with the other enterprises in accordance with technical requirements of the Russian Space agency, developed a new Russian communication satellite of a small class that will operate in both the geostationary (GSO) and high-elliptical (HEO) orbits. This satellite may be injected into operational orbits using a SOYUZ-2 launch vehicle (LV) and a FREGAT upper stage (US) from Plesetsk and Baykonur space launch sites (SLS).The main reason for creating such a satellite was to decrease the cost of the support and development of the Russian communication geostationary satellites group.Russian satellites Horizont, Express, Ekran and Gals, which operate in GSO, are the basis of the space segment for communications, radio and TV broadcasting. All of these satellites are injected into GSO by the PROTON LV. PROTON is a launch vehicle of a heavy class. The use of a middle class LV instead of a heavy class will allow to reduce considerably the launch cost. The change of a heavy class LV to a LV of middle class determined one economic reason for this project. Besides, the opportunity to launch S/C into GSO from Russian Plesetsk SLS increases the independence of Russia in the domain of space communications, despite the presence of the contract with Kazachstan about the rent of Baykonur SLS. Finally, use of small satellites with a rather small number of transponders is more effective than the use of big satellites. It will allow also to increase a satellite group (by the launch of additional satellites) precisely in accordance to the development of the ground segment.     

一种大容量100MHz数据采集记录系统的设计实现

本文提出一种实用的高速数据采集记录系统的设计方案,介绍该系统中各主要模块的功能与设计思路,讨论高速数据存储模块的设计,控制调度流程与高速数字电路设计相关处理方法。针对高速与大容量的数据采集特点,提出用存储速率受限的FLASH芯片来实现高速、大容量数据采集记录的设计方法。     

时序信号设计的一种新方法

文章结合高速时序工作的特点,从实现的角度提出了一种利用软件调整时序的新方法。在可编程逻辑器件中,利用数字时钟管理器(DCM),通过模块化和增量式设计思想达到对高速时序信号的精确调节。最终实现了一个20MHz速率的时序控制,调节精度达到100ps。     

方位向非均匀采样对多通道天线星载SAR成像性能的影响

方位向周期性非均匀采样是多通道天线星载SAR系统设计时需要考虑的一个重要因素。针对多通道天线星载SAR系统中存在的方位向周期性非均匀采样对成像性能的影响进行了分析。在建立多通道天线星载SAR回波信号模型的基础上,根据成对回波理论和匹配滤波原理推导了由方位向周期性非均匀采样所造成的虚假目标位置与强度的计算公式,并结合成像处理过程分析了二维成像处理算法对虚假目标的影响,给出了二维成像处理后所得到的虚假目标强度计算公式。最后,通过计算机仿真验证推导与分析的正确性。     

破坏性物理分析(DPA)在高可靠半导体器件质量验证中的作用

文章介绍了破坏性物理分析(DPA)内容,以及它在高可靠性半导体器件质量验证中的作用。通过大量的数据表明,DPA 能有效地评价半导体器件的批质量.